脈沖布袋除塵器儀表的檢測和控制內容：

　　The detection and control content of pulse bag filter instrument:

　　1）脈沖布袋除塵器儀表概述

　　1) Overview of Pulse Bag Dust Collector Instrument

　　儀表及自動化設計是根據自動化儀表和計算機的設計技術規范和工藝要求進行的。設計范圍除塵系統本體的過程檢測與控制。

　　The design of instruments and automation is based on the technical specifications and process requirements for the design of automation instruments and computers. Design scope: Process detection and control of the dust removal system body.

　　除塵系統及輸灰系統生產過程參數的數據采集、控制、顯示、報警等功能均由除塵器廠家PLC控制系統完成。

　　The data collection, control, display, alarm and other functions of the production process parameters of the dust removal system and ash conveying system are all completed by the dust collector manufacturer's PLC control system.

　　1除塵系統本體

　　1. Dust removal system body

　　·除塵器壓差；

　　·Differential pressure of dust collector;

　　·脈沖閥噴吹；

　　·Pulse valve blowing;

　　·離線閥通斷；

　　·Offline valve on/off;

　　·灰斗振打；

　　·Ash bucket vibration;

　　3）設計原則

　　3) Design principles

　　按“三電一體化（EIC）”的原則，完成該工程的自動化儀表設計。

　　According to the principle of "Integrated Electrical and Mechanical Engineering (EIC)", complete the automation instrument design for this project.

　　生產過程參數的數據采集、控制、顯示、報警等功能均由PLC完成。

　　The data collection, control, display, alarm and other functions of production process parameters are all completed by PLC.

　　4）儀表選型

　　4) Instrument selection

　　項目所有儀表、電動調節閥門、氣動調節閥門、切斷閥等控制閥門；將依據技術、穩定可靠、經濟實用的原則選用。

　　All instruments, electric control valves, pneumatic control valves, shut-off valves and other control valves of the project; The selection will be based on the principles of technology, stability, reliability, and economic practicality.

　　其余相關參量檢測均采用實用的相關儀表產品。

　　The detection of other relevant parameters is carried out using practical related instrument products.

　　7）脈沖布袋除塵器儀表接地系統

　　7) Pulse bag filter instrument grounding system

　　接地系統由電氣統一考慮，電氣、儀表、計算機設置綜合接地網，接地電阻小于1歐姆。接地網由甲方負責提供。

　　The grounding system is considered by the electrical department, and a comprehensive grounding network is set up for electrical, instrumentation, and computer systems, with a grounding resistance of less than 1 ohm. The grounding grid shall be provided by Party A.

　　本文由 車間整體除塵設備 友情奉獻.更多有關的知識請點擊   http://m.52campus.cn  真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from the workshop's overall dust removal equipment. For more related knowledge, please click http://m.52campus.cn Sincere attitude. We provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Please stay tuned

上一篇：涂裝生產線到底多少錢？
下一篇：什么叫噴粉線?(噴粉流水設備)具有哪些優勢？